Satellite Tin Mount
This Satellite Tin Mount will support a Satellite dish up to 90cm in diameter. It is easily mounted to most tin roofs.
As used for most standard Foxtel Satellite installations throughout Australia.
The base plate is designed to sit across two corrugations on the roof and screws down to the roof using the existing screw holes.
The stay arms also screw down through the roof into the battens. The upright pole can be adjusted plumb in both directions prior to locking them down.
The Hills FB607042A Flexi Mount Tin Roof Heavy Duty is a Foxtel approved 65cm and 80cm satellite dish mount for tile roof applications with timber framed roof structures. It can also be used in NBN fixed wireless applications with W55 wind-load regions A/B. For C/D regions it is mandatory to fit either a FB607226 or FB607150A to increase the wind loading to W60.
It is used for mounting and aiming a satellite dish in domestic and commercial applications.
Note: Not suitable for all dish sizes in all wind speed category zones please consult the manufacturers installation instructions before use. Made from all steel materials and supplied with all mounting fasteners required.
Wind Classification: C3 (W60) with 65cm dish C2.5 (W55) with 80cm dish Triangular design for minimum penetrations on a tin or tile roof.
NBN APL Approved – MA-2018-000019
Foxtel IPL #G99
Please note: As per contractual requirements only products on the NBN approved price list can be used on the NBN Fixed Wireless project.
- For tin roofs
- 90cm Dish Maximum
- Foxtel F10404 Approval
- Mounting Accessories included